|
IRoast2 40011 5-2/7-Ounce Coffee-Bean Roaster, Black | 
 enlarge | Brand: Iroast
List Price: $199.00
Buy New: $182.22
You Save: $16.78 (8%)
Rating:  35 reviews
Color: Black
Shipping Weight (lbs): 6
Dimensions (in): 12 x 7 x 12
MPN: 40011
Model: 40011
UPC: 652185400115
EAN: 0652185400115
ASIN: B000FDN1S0
Shipping: Eligible for Super Saver Shipping
Availability: Usually ships in 24 hours
| |
| |
| Features:
| • | Versatile appliance roasts coffee beans for any brewing system | | • | Roasts up to 5-2/7 ounces of green beans; built-in 4-minute cooling cycle | | • | Automatic or programmable roasting profiles; adjustable time and temperature | | • | Save up to 10 profiles; LCD display; wind-tunnel and thermoflector technology | | • | Measures approximately 7 by 7 by 12-1/4 inches |
|
| Accessories:
|
| Similar Items:
|
| Editorial Reviews:
Product Description
The popular i-Roast coffee roaster has been improved in the new i-Roast 2. This new version has some great features. It has features found in only the most sophisticated machines that can cost thousands of dollars. Features: Roasts any bean for any brewing system in less than 15 minutes. Full range of roasting capability (Cinnamon to dark French). 2 Preset Automatic Roasting Curves for slower and faster roasts. Patented temperature control to give you consistent personalized roasting performance. Roasts enough beans to produce up to 24 cups of coffee. Chaff collector system that removes all of the chaff. Hi-visibility roasting pot for easy monitoring. Compact - requires minimal counter space. Interlocking parts for excellent product stability. Built in 4 minute cooling cycle. Up to 10 memory functions. Up to 5 stages.
|
| Customer Reviews: Read 5 more reviews...
 Better than Turning a Crank for 10 minutes June 21, 2008
General Turgidson (Philadelphia, PA)
1 out of 1 found this review helpful
Update - 06/08
Well, it's 2-1/2 years since replacing the I-Roast with version 2, and I've now put about 150 lbs of coffee through it. I've watched its behavior over many seasons. Recently, I thought the unit was dying... the motor seemed to be balking, so I went to the sweetmarias website to look at the array of coffee roasters that might replace the unit. I found a note in their comparison chart about I-Roast 2 being sensitive to ambient temperature and variations in line voltage. The motor was balking in the middle of a heat wave, and I knew from the line voltage measure on our PC's APC that all the air-conditioning was bringing the voltage down to 109. The unit was not dying. This week, with the heat-wave over, and line voltage back up to 120, it was back to its normal jet engine sound.
So, I reiterate that you cannot just find a profile setting that works once, and then just walk away. The following items change the roasting profile without warning:
1) Coffee variety. Large dense beans take longer than small or less dense beans
2) Ambient temperature. If it's late autumn, and you haven't turned your heat on yet, the roast will take longer.
3) Line voltage. If your voltage drops (even from 120 to 118) it will lengthen the roast time.
4) Cleaning. You must keep the screen and trap at the top of the unit clean. (I use a brass brush) If the screen gets dirty, the airflow slows through the machine and it gets hotter than expected, shortening roasting time, and causing "tipping" or uneven roasting.
One final item. The handle on the top chamber is meant only to bear the weight of the top chamber. Do not use this to carry the whole machine. That bit of abuse may be responsible for some of the breakage reported in this series of reviews.
Update- 04/06
Replaced the original with the I-Roast 2. Fantastic improvement. Will store several different user defined profiles. Roasting chamber has been re-engineered and is solid.
As other users have pointed out, it does sound like a jet engine, and it is smokey.... but then smoke is just part of roasting coffee. For those who imagine the smell of roasting coffee wafting through their homes, you need to know that while roasted coffee smells good, roasting coffee is pretty nasty, and you need to vent the smoke.
Update- 10/05
Some of the metal parts on the roasting chamber were under-engineered, and the chamber started leaking air and coming apart. Temperature sensors seem to have gone, and with them, any notion of a roasting profile.
Original (Original I-Roast as well)-----
I used to use a stove-top corn-popper for roasting, which was pretty dull and burned my fingers. The iRoast is pretty good compared to that. The roast is very even, cleaning is easy, and you can watch the roast.
The down-side is that you need to watch the roast towards the end. You cannot program the machine, walk away, and expect it to finish the job all by itself. Slight variation in ambient temperature, (summer/winter, oven on recently, morning/afternoon) can result in notable changes in roast time. You must always program it for longer than the roast should take, and watch the last few minutes to stop the roast at the right time.
It would be nice if the machine remembered the program from one roast to the next.
 Great tasting coffee, flimsy product June 1, 2008
S. Smith
I bought the iRoast2 as an upgrade for the Fresh Roast Plus that we had used for years. At first, I appreciated the more sophisticated roasting results we could get with the iRoast, and the fact that we could roast over double the amount of coffee per batch. However, after less than a year of moderate use, the glass roasting carafe cracked during the roasting process. I bit the bullet and ordered a replacement carafe from Hearthware. Now, less than 2 months later, the motor on the iRoast has given out. The fan stopped working mid-roast, causing the beans to overheat and a smoke disaster in the kitchen. So after just over 1 year of use, the product is shot.
Combining my experience and those of other reviewers here, obviously this product is not made to endure the test of time. This is an expensive product to provide just one year of use, not to mention the extra carafe I had to purchase. The Fresh Roast Plus, at half the price, is still going strong. I would not waste my money on another iRoast.
 Top broke after about 20 uses May 13, 2008
klein
1 out of 1 found this review helpful
This little machine does a good job, until the top ring breaks and starts spewing chaff and smoke out the side. I am calling in for warranty work tomorrow (their office is closed now). In retrospect, I should have bought something a bit more sturdy and not so cheaply made. I hope this helps the next person not get a defective product.
Utter piece of junk April 30, 2008
Michael J. Muscato (Irvine, CA USA)
3 out of 3 found this review helpful
I had a Fresh Roast for several years but decided it was time to "upgrade." The iRoast arrived and promptly broke during the first roast. The plastic cracked just beneath the handle making it unable to lock in place. Instead of sending an entirely new unit I was sent just the top roast chamber. Although it has not broken (yet) the top portion that screws onto the roast chamber does not fit quite right. It is already cracking off chips around the edge and currently it's a struggle just to screw it in place. In addition, the unit is so loud (it's not referred to as the "iRoar" for nothin') that it's almost impossible to hear the second crack, which is fairly important when you're trying to dial in profiles. All in all, it's been a complete disappointment so far.
Worst after sales service ever April 29, 2008
Mev Jones (South Africa)
3 out of 3 found this review helpful
I bought this product - and had some issues with how it worked (the main roasting pot was also slightly chipped and cracked, and I wanted to find a local distributor where I could exchange the product immediately). In order to get some answers I:
1/ Emailed the suggested contact on the iRoast website
2/ Emailed every other email address at iRoast I could find
3/ Posted several questions on their FAQ part of the site
All this, and no response. I have subsequently figured things out, but cannot understand why a company that have a good product cannot offer decent after sales service. It is as if they are all on holiday and relying on suckers like me to keep buying their product.
|
|
|
|
| |
