|
Blend, Chop & Mix
Coffee & Espresso
Grills, Fryers & Cookers
Toasters & Ovens
Juicers & Drink Makers
|
|
|
|
Mantis SwiftSplit, Electric Log Splitter #5005 | 
 enlarge | Brand: Mantis
List Price: $499.95
Buy New: $450.54
You Save: $49.41 (10%)
Rating:  3 reviews
Media: Tools & Hardware
Shipping Weight (lbs): 154
Dimensions (in): 34.5 x 21.5 x 38.5
Model: 5005
UPC: 615964027477
EAN: 0615964027477
ASIN: B000FIV2AE
Availability: Usually ships in 24 hours
| |
| Features:
| • | Electric Log Splitter | | • | Powerful, clean running 1.5kw electric motor uses a standard 110/120 volt outlet | | • | Vertical design makes loading logs easy | | • | Compact dolly carriage design for easy maneuverability and storage | | • | Solid steel construction for durability and 10 pneumatic tires for transporting ease. |
|
| Accessories:
|
| Customer Reviews:
 Works like a Champ August 31, 2008
James P. Johnson (Keller, TX USA)
1 out of 2 found this review helpful
I've been watching the price of the Swiftsplit for at least two years but $495 was more than I wanted to spend on an electric splitter. When Amazon listed the splitter at $222 plus freight ($95 because the splitter weighs 154 lbs.) I had to give it a chance. The assembly takes about 30 minutes or so, nothing really difficult. Then it was time to head to the wood pile. I used the splitter on seasoned and fairly green wood (8" to 12" in diameter) and it handled everything. On pieces of wood that are right at 20" the splitter may not completely split so a little manual may be needed, but nothing strenuous. So far, I'm really happy with this splitter.
 Mantis Swift Split is OK for light loads August 30, 2008
Steven L. Hirsch (Washingtonville, NY USA)
4 out of 4 found this review helpful
I have been using my new Mantis Swift Split for about a month and have split about a cord on weekends to date. The platform at the bottom where the jack pushes up to lift the log to the wedge is already deforming and a bulbous round dimple is pushing up, making it a bit more challenging to position a log on the base. I only hope that this doesn't continue to get worse. Basically, you should split your smaller logs on this unit, nothing over 10" or so, even though it says it can handle 12" logs. The larger, heavier logs will no doubt deform the base plate. The manual lists a bunch of accepatble hydraulic oils you can use but you will find that none of them are available except in 5 gallon buckets from major distributors. You can also use Dexron III ATF though which is more readily available.
I am somewhat pleased with the Swift Split since I can split wood 3X faster than I used to with my manual splitter but this unit is not as powerful as I had hoped. If you can afford it, get a more powerful and stronger splitter, especially if you intend to split a lot of logs 10" in diameter and larger.
Followup, 9/15/08. I split another 1/2 cord this weekend and had problems splitting a load of Ash logs. Seemed even more difficult to split than Locust, unless the splitter is getting weaker.Had to shave pieces off the edges of the logs to get them smaller so I could split them. Even some 10" Ash logs stopped this splitter; lots of rearranging the logs to position them to get a good angle. Base plate could be larger to have better balance. I hope this splitter lasts the winter. Next time I will spend more money and get a more powerful splitter. If I make my money back on this thing by splitting 5 or 6 cords then I will consider myself lucky.
Followup, 10/13/08. I think I have found one of the secrets to this Mantis Swift Split. You must use a super heavy duty extension cord of at least 14 gauge and no longer than 25 foot. When using this type of extension cord the motor spins up faster and it splits wood better with more power. I split another 1/2 cord of locust yesterday without much of a problem. Noticed that the top of the splitter where the rails and the jack are joined is twisted somewhat and it occasionally makes a squealing sound while splitting. I twist it back to center but it twists again on the next split. Lubing with lithium grease doesn't help. Another issue I will keep my eye on. Also, watch out for the wingnut on top where the hydraulic oil pressure emergency release is. You need to loosen this wingnut before splitting but don't loosen it too much as it can vibrate loose and fall off and then you will have trouble finding it. Good luck.
 Works Good 'Til It Breaks February 1, 2008
R. Shogren (Salina, Ks USA)
18 out of 19 found this review helpful
This splitter works pretty well for the occasional woodburner. It will not suffice for the fulltime user. If you try to split something that is simply too much for it, it might break - like mine did. The carrier weldment that holds the log (at the bottom) cracked out from too much pressure. When I tried to order a replacement from Mantis, they said they don't have any and would not ship me the needed part.
|
|
|
|
| |
